$ 13.48 $ 21.95
The Aprilaire 10 compatible replacement humidifier water panel filter by Revolution Filters generates the humidity in whole house humidifier systems. Humidity makes air easier to breathe and can soothe troublesome winter symptoms. In warmer months we often enjoy not having to constantly apply lip balm, try and correct cracked and peeling and skin, or even stop bloody noses. On cold days, you run your heat and the air quickly dries out leaving you feeling uncomfortable. Cracked skin or damaged membranes inside your noses allows germs and viruses to easily enter your bodies and make you sick. Humidifiers work to counteract the effects of dry air, soothing aliments, and even going as far as helping prevent colds and viruses from forcing us into bed while feeling achy. Check you humidifier pad, and if it needs replaced, consider the Aprilaire 10.
For peak performance we recommend that the Water Panel be replaced once a year, either prior to the start or at the end of the heating season. For especially hard water - the panel can be replaced 2 times per year.
$ 34.95 $ 49.95
Skuttle Evaporator Pad Part # A04-1725-052 fits whole house humidifiers from Skuttle, White-Rodgers, Goodman and...
$ 16.95 $ 39.95
Lennox Healthy Climate #35 Water Panel Evaporator - # X2661 Size: 10 x 13 x...
$ 26.95 $ 49.95
Replacement Humidifier Pad #A04-1725-034 This foam, belt-style humidifier filter is also known as the water...
When you are buying your air filter online most important thing to know is Air Filters have two sizes that you need to understand the Nominal size and the Actual Size. Not understanding these numbers often leads to consumers purchasing a filter that does not fit their Furnace or HVAC system.
Not understanding the Nominal Filter Size is the primary culprit for incorrectly purchased filters.The Nominal Size is the usually the dimensions used to Label the filter. For instance 16x20x1. These dimensions are a rounded value on the filters actual measurements. The actual measurements on this filter may be 15.5x19.5x.75, but that could vary by brand and manufacturer. So in order to make sure you have the correct size filter, especially if you are replacing with a different brand it is important to confirm the actual size on the filter. When purchasing filters on the internet the Nominal size is usually found in the product title.
The actual size as you might have guessed are the actual dimensions of the filter by length, width and thickness. This size is often on the filter right below the Nominal size and is usually labeled as the actual size. When you are buying a filter online the actual size is sometime in the product bullet point or the product description. If your filter does not have actual dimensions on the outside of the filter, you can measure you filter to get the correct dimensions. Some brands have a foam gasket on the outside of the filter, in this case, you will want to make sure you have a compatible actual size and that it also has the foam to ensure a snug fit.
|Size||Example 1||Example 2|
Furnace filters should fit securely but should not have to be forced into position. If you have to force the filter into its slot, then it is probably too big. Forcing an improper filter size in a filter can cause it to buckle, damaging the filter or reducing its ability to function properly. Filters are a smaller than their slot to allow for easy replacement. Some HVAC units may need a filter with dimensions that are unique or uncommon. In these cases, a custom filter needs to be ordered.