$ 49.95 $ 89.95
Goodman M1-1056 MEDIA AIR CLEANER REPLACEMENT FILTERS by Atomic Compatible Replacement for GENUINE OEM (ORIGINAL EQUIPMENT MANUFACTURER)
Nominal Size: 16" x 25" x 5" Actual Size: 15-3/8" x 25-1/2" x 5-1/4" Efficiency Rating: MERV 11
The actual dimensions are 15 3/8" x 25 1/2" x 5 1/4". The part numbers used to identify this filter are M1-1056 from Goodman, P102-1625 from Carrier group and 918395 from Five Seasons. OEM High-efficiency MERV 11 Media Filter with extra deep pleats allowing more surface area for a longer filter life. These filters have better air flow with low static pressure extends furnace life with savings in energy costs.
These Furnace Filters also are the proper replacement for 16x25 High Efficiency Media Air Cleaners filters of following makes and models. • Amana: A13MU1625, ABB1625, AMU1625 • Broan: 918376, 918402, 919060, BB1625, MU1625 • Carrier: CMF1625, CNC1625 • Coleman: CEMU1625, CENC1625 • Electro-Air: EABB1625, EAMU1625, EANC1625, EA14MU1625 • Five Seasons: FS14MU1625, FSBB1625, FSMU1625, FSNC1625 • Goodman: G13MU1625, GBB1625, GMU1625 • Janitrol: G13MU1625, GBB1625, GMU1625 • Nordyne 918376, 908402, 919060, N-BB1625, N-MU1625 • Totaline: P102-BB14A, P102-MF14A, Totaline P102-1625 9183650 • York YMU1625, YNC1625
Ordered these hard-to-find filters from Atomic Filters. They fit our furnace perfectly and arrived within 48 hours or less after I placed the order. Very pleased!
Correct filters for my system. Hard to find. Staff were good in helping me, expedite order! Will order again!
$ 39.95 $ 69.95
Totaline 16x25 part P102-1625 16 x 25 x 5 nominal size. 15-3/8 x 25-1/2 x...
$ 36.49 $ 59.95
Totaline 16x20 part P102-1620 Part number: P102-1620 For Use with Totaline Models P102-MF2 & P102-NC12...
$ 39.49 $ 79.95
Totaline 20x25 part P102-2025 For use with Totaline Models P102-MF20 & P102-NC20 Nominal Size: 20"...
When you are buying your air filter online most important thing to know is Air Filters have two sizes that you need to understand the Nominal size and the Actual Size. Not understanding these numbers often leads to consumers purchasing a filter that does not fit their Furnace or HVAC system.
Not understanding the Nominal Filter Size is the primary culprit for incorrectly purchased filters.The Nominal Size is the usually the dimensions used to Label the filter. For instance 16x20x1. These dimensions are a rounded value on the filters actual measurements. The actual measurements on this filter may be 15.5x19.5x.75, but that could vary by brand and manufacturer. So in order to make sure you have the correct size filter, especially if you are replacing with a different brand it is important to confirm the actual size on the filter. When purchasing filters on the internet the Nominal size is usually found in the product title.
The actual size as you might have guessed are the actual dimensions of the filter by length, width and thickness. This size is often on the filter right below the Nominal size and is usually labeled as the actual size. When you are buying a filter online the actual size is sometime in the product bullet point or the product description. If your filter does not have actual dimensions on the outside of the filter, you can measure you filter to get the correct dimensions. Some brands have a foam gasket on the outside of the filter, in this case, you will want to make sure you have a compatible actual size and that it also has the foam to ensure a snug fit.
|Size||Example 1||Example 2|
Furnace filters should fit securely but should not have to be forced into position. If you have to force the filter into its slot, then it is probably too big. Forcing an improper filter size in a filter can cause it to buckle, damaging the filter or reducing its ability to function properly. Filters are a smaller than their slot to allow for easy replacement. Some HVAC units may need a filter with dimensions that are unique or uncommon. In these cases, a custom filter needs to be ordered.
Signup For Atomic Filters Newsletter