$ 54.99 $ 89.95
Atomic Compatible Replacement Filter for Totaline 16x25 part P102-1625. 2 Filters 16 x 25 x 5 nominal size. 15-3/8 x 25-1/2 x 5-1/4 actual size. For Use with Totaline Models P102-MF14A & P102-NC14A Atomic Compatible Replacement for OEM Totaline brand 16x25x5 part number: P102-1625. This filter also replaces AMANA, Bryant, Carrier Coleman, ELECTRIC-AIR, FIVE SEASONS, GOODMAN, JANITROL, NORDYNE, PAYNE, YORK and BDP Models 9183950,M1-1056, MU1625, Replacement for BRYANT Carrier FILBBCAR0016, FILXXCAR0016, FILXXCAR0116. The filter material is constructed of continuous hydrophobic polyolefin fibers that will not shred or absorb moisture. They are cellulose free and will not sustain mold growth. Unique filter design features a structured density gradient with an electret charge for higher initial and sustained efficiency over the life of the filter. Extra deep, 5 1/4 inch filter contains more media material than other filters on the market. More surface area means more collection area, longer filter life, and lower static pressure. Perfect fit filter has an exact fit with the cabinet. Does not contain foam, sponge or fiberglass filler. Means all the air is passing through the filter and not through filler material, thereby maximizing the system’s ability to clean the air.
$ 39.95 $ 69.95
Totaline 16x25 part P102-1625 16 x 25 x 5 nominal size. 15-3/8 x 25-1/2 x...
$ 36.49 $ 59.95
Totaline 16x20 part P102-1620 Part number: P102-1620 For Use with Totaline Models P102-MF2 & P102-NC12...
$ 39.95 $ 69.95
Totaline 20x20 part P102-2020 For use with Totaline Models P102-MF14B & P102-NC14B Nominal Size: 20"...
When you are buying your air filter online most important thing to know is Air Filters have two sizes that you need to understand the Nominal size and the Actual Size. Not understanding these numbers often leads to consumers purchasing a filter that does not fit their Furnace or HVAC system.
Not understanding the Nominal Filter Size is the primary culprit for incorrectly purchased filters.The Nominal Size is the usually the dimensions used to Label the filter. For instance 16x20x1. These dimensions are a rounded value on the filters actual measurements. The actual measurements on this filter may be 15.5x19.5x.75, but that could vary by brand and manufacturer. So in order to make sure you have the correct size filter, especially if you are replacing with a different brand it is important to confirm the actual size on the filter. When purchasing filters on the internet the Nominal size is usually found in the product title.
The actual size as you might have guessed are the actual dimensions of the filter by length, width and thickness. This size is often on the filter right below the Nominal size and is usually labeled as the actual size. When you are buying a filter online the actual size is sometime in the product bullet point or the product description. If your filter does not have actual dimensions on the outside of the filter, you can measure you filter to get the correct dimensions. Some brands have a foam gasket on the outside of the filter, in this case, you will want to make sure you have a compatible actual size and that it also has the foam to ensure a snug fit.
|Size||Example 1||Example 2|
Furnace filters should fit securely but should not have to be forced into position. If you have to force the filter into its slot, then it is probably too big. Forcing an improper filter size in a filter can cause it to buckle, damaging the filter or reducing its ability to function properly. Filters are a smaller than their slot to allow for easy replacement. Some HVAC units may need a filter with dimensions that are unique or uncommon. In these cases, a custom filter needs to be ordered.