Get Free Shipping when you order the OEM Whirlpool 1183051K Hepa Filter and get free shipping and save big when you order 2 or more of the Compatible Whirlpool 1183051K Hepa Filter by Atomic filters. Whirlpool 1183051K Hepa Filter Small Replacement filter is a True HEPA filter which is perfect for filtering 99.97% of airborne particles as small as 0.3 microns, including House Dust, Pet Dander, Tobacco Smoke, Mold Spores, Plant Pollens and Household Fibers. Atomic Filters carries the OEM 1183051K Hepa Filter filter by Whirlpool and the Ultra High End 1183051K Compatible Filter Hepa by Atomic Filters.
These Filters are made for Whirlpool® Whispure™ Air Purifier model AP25030K, also fits legacy Whirlpool® Air Purifier models AP150 and AP250. This filter replaces Whirlpool AP250 Filter and Whirlpool AP150 Filters.
Comments will be approved before showing up.
Many furnace filters are can easily be replaced with another brand and you may be able to get equal quality air filtration at a significantly lower price. But just because a filter has the same size printed on it as your current filter does not mean it is a suitable replacement. The Nominal size the filters may have printed on the filter and found in the title of the product is often different from the actual size of the filter. This Totaline P102-1625 has a nominal size of 16x25x1 but the printing on the filter also shows the actual size as "Size". This filter also lists compatible model numbers: M1-1056, AMP-M1-1056, P102-1625 and 918395.
Many furnace filters are can easily be replaced with another brand and you may be able to get equal quality air filtration at a significantly lower price. But just because a filter has the same size printed on it as your current filter does not mean it is a suitable replacement. To Find the correct replacement furnace filter it is important to make sure the actual size(measured dimensions of the air filter) of the filter being replaced are the same as the filter being purchased. The Nominal size printed on the filter is often a rounded size and actual sizes vary by brand. The Actual Size of the M1-1056 is 15-3/8 X 25-1/2 X 5-1/4.
To Find the correct replacement furnace filter it is important to make sure the actual size(measured dimensions of the air filter) of the filter being replaced are the same as the filter being purchased. The Nominal size printed on the filter is often a rounded size and actual sizes vary by brand. The Actual Size of the Goodman M1-1056 is 15-3/8 X 25-1/2 X 5-1/4.
When you are buying your air filter online most important thing to know is Air Filters have two sizes that you need to understand the Nominal size and the Actual Size. Not understanding these numbers often leads to consumers purchasing a filter that does not fit their Furnace or HVAC system.
Not understanding the Nominal Filter Size is the primary culprit for incorrectly purchased filters.The Nominal Size is the usually the dimensions used to Label the filter. For instance 16x20x1. These dimensions are a rounded value on the filters actual measurements. The actual measurements on this filter may be 15.5x19.5x.75, but that could vary by brand and manufacturer. So in order to make sure you have the correct size filter, especially if you are replacing with a different brand it is important to confirm the actual size on the filter. When purchasing filters on the internet the Nominal size is usually found in the product title.
The actual size as you might have guessed are the actual dimensions of the filter by length, width and thickness. This size is often on the filter right below the Nominal size and is usually labeled as the actual size. When you are buying a filter online the actual size is sometime in the product bullet point or the product description. If your filter does not have actual dimensions on the outside of the filter, you can measure you filter to get the correct dimensions. Some brands have a foam gasket on the outside of the filter, in this case, you will want to make sure you have a compatible actual size and that it also has the foam to ensure a snug fit.
|Size||Example 1||Example 2|
Furnace filters should fit securely but should not have to be forced into position. If you have to force the filter into its slot, then it is probably too big. Forcing an improper filter size in a filter can cause it to buckle, damaging the filter or reducing its ability to function properly. Filters are a smaller than their slot to allow for easy replacement. Some HVAC units may need a filter with dimensions that are unique or uncommon. In these cases, a custom filter needs to be ordered.