Whirlpool Model 1183054k HEPA Filter Large is the correct replacement HEPA filter for the AP45030k, AP51030k, WP500, WP1000.
In Addition to the AP450 AP510 WP500 and WP1000, the 1183054 also fits legacy Models AP350 and Ap300. Complete Model List: Whispure AP3003VK, AP35030H, AP45030H, AP45030K, AP45030R, AP45030S, AP4503VK, AP51030H, AP51030K, AP51030L, AP51030R, AP51030S Air Purifiers.
Whirlpool Model 8171434K Carbon Pre-Filter Large 4 pack is the correct replacement pre-filter for the AP450 AP510 WP500 and WP1000. The 8171434 also fits legacy Models AP350 and Ap300. Complete Model List: Whispure AP3003VK, AP35030H, AP45030H, AP45030K, AP45030R, AP45030S, AP4503VK, AP51030H, AP51030K, AP51030L, AP51030R, AP51030S Air Purifiers.
|Air Purifier Model No.||HEPA /Charcoal Filter Replacement Part No.||Pre-filter Replacement Part No.|
An indicator light on the top of the Air Purifier will light up when it is time to change the 1183054k HEPA Filter or Carbon pre-filter 8171434k. The recommended replacement for the 1183054k is every 12 months and every 3 months for the pre-filter 8171434 for the most efficient operation of the Air Purifier.
NOTE: Filter changes should be more frequent with excessive smoke, dust or pet hair.
NOTE: Pushing the reset button before the filter light has come on will NOT reset the timer.
For more information on the AP51030k please check out the manual.
Comments will be approved before showing up.
Your air filter is not only an important component in protecting your homes HVAC(Heating Ventaliation and Air Conditioning) system, it is important for protecting your family against the top concerns for the CDC, EPA and American Lung Association. Indoor air quality or IAQ can be 200 to 500 times more polluted than the air outside.
Lennox X7935 MERV 16 Furnace Filter Free Shipping Healthy Climate HCC14-16 Air Cleaner $98.95
Experience the ultimate air quality with the Lennox X7935 Air filter.
1 Inch Air Filters also known as Furnace Filters, HVAC Filters, Air Conditioner Filter and AC Filters. Atomic brand filters are made from Quality materials in The USA. Made in the USAFilters are made of synthetic material and pleated for optimal air flow. Air filters with a Nominal Size of 1 inch thick air filters have an actual size of .75 inches. MERV 8 air filters use Mechanical filtering to filter out particulate from the air flow. MERV 11 and MERV 13 air filters use Triboelectric(or electrostatic properties in addition to mechanical means to filter the air flow.
Air Filter Size Chart
When you are buying your air filter online most important thing to know is Air Filters have two sizes that you need to understand the Nominal size and the Actual Size. Not understanding these numbers often leads to consumers purchasing a filter that does not fit their Furnace or HVAC system.
Not understanding the Nominal Filter Size is the primary culprit for incorrectly purchased filters.The Nominal Size is the usually the dimensions used to Label the filter. For instance 16x20x1. These dimensions are a rounded value on the filters actual measurements. The actual measurements on this filter may be 15.5x19.5x.75, but that could vary by brand and manufacturer. So in order to make sure you have the correct size filter, especially if you are replacing with a different brand it is important to confirm the actual size on the filter. When purchasing filters on the internet the Nominal size is usually found in the product title.
The actual size as you might have guessed are the actual dimensions of the filter by length, width and thickness. This size is often on the filter right below the Nominal size and is usually labeled as the actual size. When you are buying a filter online the actual size is sometime in the product bullet point or the product description. If your filter does not have actual dimensions on the outside of the filter, you can measure you filter to get the correct dimensions. Some brands have a foam gasket on the outside of the filter, in this case, you will want to make sure you have a compatible actual size and that it also has the foam to ensure a snug fit.
|Size||Example 1||Example 2|
Furnace filters should fit securely but should not have to be forced into position. If you have to force the filter into its slot, then it is probably too big. Forcing an improper filter size in a filter can cause it to buckle, damaging the filter or reducing its ability to function properly. Filters are a smaller than their slot to allow for easy replacement. Some HVAC units may need a filter with dimensions that are unique or uncommon. In these cases, a custom filter needs to be ordered.