Free Shipping / Questions? Call us: 910-401-3910

What is the Whirlpool Whispure Air Purifier Replacement HEPA Filter for Model AP45030k, AP51030k, WP500, WP1000

by Kevin King November 12, 2017

What is the Whirlpool Whispure Air Purifier Replacement HEPA Filter for Model AP45030k, AP51030k,  WP500, WP1000

What is the Replacement HEPA Filter for the Whirlpool Whispure Air Purifier Model AP45030k, AP51030k, WP500, WP1000?

Whirlpool Model 1183054k HEPA Filter Large is the correct replacement HEPA filter for the AP45030k, AP51030k, WP500, WP1000. 

In Addition to the AP450 AP510 WP500 and WP1000, the 1183054 also fits legacy Models AP350 and Ap300. Complete Model List: Whispure AP3003VK, AP35030H, AP45030H, AP45030K, AP45030R, AP45030S, AP4503VK, AP51030H, AP51030K, AP51030L, AP51030R, AP51030S Air Purifiers. 

 Air Purifier Model No. HEPA /Charcoal Filter Replacement Part No. Pre-filter Replacement Part No.
AP250/AP25030K 1183051K 8171433K
AP450/AP45030K 1183054K 8171434K
AP510/AP51030K 1183054K 8171434K
WP500 1183054K 8171434K
WP1000 1183054K 8171510K

When Should I replacement My 1183054k HEPA Filter?

An indicator light on the top of the Air Purifier will light up when it is time to change the 1183054k HEPA Filter or Carbon pre-filter  8171434k. The recommended replacement for the 1183054k is every 12 months and every 3 months for the pre-filter 8171434 for the most efficient operation of the Air Purifier. 

NOTE: Filter changes should be more frequent with excessive smoke, dust or pet hair.

How to Replace Your  Air Purifier model AP45030k, AP51030k, WP500, WP1000 Filters

  1. Place fingers on the front release tabs. Gently push tabs in and pull front grille forward to remove it.
  2. Remove and replace the indicated filter. Instal the new HEPA filter in the same direction shown by the arrow located on the filter frame. install the new prefilter by placing it on the tabs. DO NOT try to wash or reuse either the HEPA filter or the pre-filter.
  3. Place bottom tabs on the front grille into slots in base of air purifier. Push top of grille forward until grille locks in place.
  4. Push the reset button to turn off light(s) and reset time.

Whirlpool Whispure Air Purifier Replacement HEPA Filter for Model AP45030k, AP51030k, WP500, WP1000 by Atomic Filters

NOTE: Pushing the reset button before the filter light has come on will NOT reset the timer.

What is the Whirlpool Whispure Air Purifier Replacement HEPA Filter for Model AP45030k, AP51030k,  WP500, WP1000

For more information on the AP51030k please check out the manual.

What is the Correct Carbon Pre-filter Replacement for the  Whirlpool Whispure Air Purifier Model AP45030k, AP51030k, WP500, WP1000?

Whirlpool Model 8171434K Carbon Pre-Filter Large 4 pack is the correct replacement pre-filter for the AP450 AP510 WP500 and WP1000. The 8171434 also fits legacy Models AP350 and Ap300. Complete Model List: Whispure AP3003VK, AP35030H, AP45030H, AP45030K, AP45030R, AP45030S, AP4503VK, AP51030H, AP51030K, AP51030L, AP51030R, AP51030S Air Purifiers.

 

 

 

 




Kevin King
Kevin King

Author


Leave a comment

Comments will be approved before showing up.


Also in News

P102-1625 16x25x5 Furnace Filter: 45 Best Replacement Options
P102-1625 16x25x5 Furnace Filter: 45 Best Replacement Options

by Kevin King July 02, 2018

Important information You Must Know when replacing the P102-1625 16x25x5 Furnace Filter

Many furnace filters are can easily be replaced with another brand and you may be able to get equal quality air filtration at a significantly lower price. But just because a filter has the same size printed on it as your current filter does not mean it is a suitable replacement. The Nominal size the filters may have printed on the filter and found in the title of the product is often different from the actual size of the filter. This Totaline P102-1625 has a nominal size of 16x25x1 but the printing on the filter also shows the actual size as "Size". This filter also lists compatible model numbers: M1-1056, AMP-M1-1056, P102-1625 and 918395. 

Continue Reading →

M1-1056 16X25x5 MERV 11:  List of  45 Brand Name Replacement Furnace Filters
M1-1056 16X25x5 MERV 11: List of 45 Brand Name Replacement Furnace Filters

by Kevin King July 01, 2018

The most important information to know when replacing the M1-1056 Furnace Filter

Many furnace filters are can easily be replaced with another brand and you may be able to get equal quality air filtration at a significantly lower price. But just because a filter has the same size printed on it as your current filter does not mean it is a suitable replacement.  To Find the correct replacement furnace filter it is important to make sure the actual size(measured dimensions of the air filter) of the filter being replaced are the same as the filter being purchased. The Nominal size printed on the filter is often a rounded size and actual sizes vary by brand. The Actual Size of the M1-1056 is 15-3/8 X 25-1/2 X 5-1/4.

Continue Reading →

Goodman M1-1056 Replacement Furnace Filter Size 16x25x5
Goodman M1-1056 Replacement Furnace Filter Size 16x25x5

by Kevin King June 30, 2018

The most important information to know when replacing the Goodman M1-1056 Furnace Filter

To Find the correct replacement furnace filter it is important to make sure the actual size(measured dimensions of the air filter) of the filter being replaced are the same as the filter being purchased. The Nominal size printed on the filter is often a rounded size and actual sizes vary by brand. The Actual Size of the Goodman M1-1056 is 15-3/8 X 25-1/2 X 5-1/4. 

Continue Reading →

Nominal Vs. Actual Sizes: Finding the Right Air Filter Size

Buying the Correct Size Air Filter- The Most Important Thing to Know 

When you are buying your air filter online most important thing to know is Air Filters have two sizes that you need to understand the Nominal size and the Actual Size. Not understanding these numbers often leads to consumers purchasing a filter that does not fit their Furnace or HVAC system.

Nominal vs Actual air filter size by Atomic

 

Understanding Nominal Filters Size Could Save You Time and Money

Not understanding the Nominal Filter Size is the primary culprit for incorrectly purchased filters.The Nominal Size is the usually the dimensions used to Label the filter. For instance 16x20x1. These dimensions are a rounded value on the filters actual measurements. The actual measurements on this filter may be 15.5x19.5x.75, but that could vary by brand and manufacturer. So in order to make sure you have the correct size filter, especially if you are replacing with a different brand it is important to confirm the actual size on the filter. When purchasing filters on the internet the Nominal size is usually found in the product title.

Actual Filter Size- The Key to Making the Right Replacement Filter Purchase

The actual size as you might have guessed are the actual dimensions of the filter by length, width and thickness. This size is often on the filter right below the Nominal size and is usually labeled as the actual size. When you are buying a filter online the actual size is sometime in the product bullet point or the product description. If your filter does not have actual dimensions on the outside of the filter, you can measure you filter to get the correct dimensions. Some brands have a foam gasket on the outside of the filter, in this case, you will want to make sure you have a compatible actual size and that it also has the foam to ensure a snug fit. 

Lennox Air Filter X0851 with Foam strips

Examples of Nominal and Actual Sizes

 Size  Example 1  Example 2
Nominal Size 20x20x1 16x20x1
Actual Size 19.5x19.5x.75 15.75x19.75x.75

 

 Furnace filters should fit securely but should not have to be forced into position. If you have to force the filter into its slot, then it is probably too big. Forcing an improper filter size in a filter can cause it to buckle, damaging the filter or reducing its ability to function properly. Filters are a smaller than their slot to allow for easy replacement. Some HVAC units may need a filter with dimensions that are unique or uncommon. In these cases, a custom filter needs to be ordered.

;