Bryant Furnace Filter Size by Model Number: Find Your Exact Replacement Filter

Last Updated: March 2026 | Need help? Call us at 910-401-3910

Bryant furnaces use the same filter cabinet systems as Carrier (they're both made by Carrier Global Corporation), but with Bryant-specific model numbers that can make finding the right replacement filter confusing. This guide maps every Bryant furnace series to the correct filter cabinet and part number so you can order with confidence.

Quick Answer: Bryant Filter Systems

Bryant systems use the same three filter cabinet types as Carrier, just with slightly different model numbers:

The key fact to know: Bryant's "Perfect" series is equivalent to Carrier's "Infinity" series. Bryant's "Preferred" series is equivalent to Carrier's "Performance" series. The EZ Flex system is identical between both brands.

Step 1: Find Your Bryant Filter Cabinet Model Number

Walk to your Bryant furnace and locate the filter cabinet — the metal box attached to or mounted near the furnace where the filter slides in. The model number is printed on a sticker on the cabinet door or side panel.

Look for these prefixes:

• GABBXCC → Bryant Perfect Air Purifier (uses GAPBBCAR or GAPCCCAR filters)
• PGAPAXX or DGAPAXX → Bryant Preferred / Performance Air Purifier (uses PGAPXCAR / AGAPXCAR filters)
• EZXCAB → EZ Flex expandable filter cabinet (uses EXPXXFIL filters)
• No cabinet → Standard return vent filter

Step 2: Match Your Cabinet to the Correct Filter

Bryant Perfect Air Purifier — GABBXCC Cabinets → GAPBBCAR / GAPCCCAR Filters

Bryant's Perfect Air Purifier is their top-tier whole-house air cleaning system, equivalent to the Carrier Infinity system. It uses MERV 15 media filters with Captures and Kills™ technology that electrically inactivates trapped bacteria, viruses, and mold spores.

How to identify: Your cabinet model number starts with GABBXCC followed by four digits indicating size.

Bryant GAPBBCAR vs. Carrier GAPCCCAR — Are they the same? Yes. These filters are identical in every dimension. They fit in either brand's cabinet. If your Bryant cabinet says GABBXCC2025, you can use either a GAPBBCAR2025 or a GAPCCCAR2025. We carry both.

Reading the model number: The last four digits indicate the nominal size. GABBXCC2025 = 20×25 size. GABBXCC1625 = 16×25 size.

Shop Bryant / Carrier MERV 15 Filters →

Bryant Preferred / Performance Air Purifier — PGAPAXX Cabinets → PGAPXCAR / AGAPXCAR Filters

Bryant's Preferred Air Purifier (equivalent to Carrier's Performance Air Purifier) uses MERV 13 cartridge filters with metallic foil tabs that activate the ionization system in the cabinet.

How to identify: Your cabinet model number starts with PGAPAXX or DGAPAXX followed by four digits.

These are the same PGAPXCAR filters used by Carrier. Bryant and Carrier use identical Preferred/Performance air purifier cabinets and filters. The part numbers are the same between brands.

Shop All Bryant / Carrier PGAPXCAR Filters →

Bryant EZ Flex Cabinet — EZXCAB → EXPXXFIL Filters

The EZ Flex is the most common filter cabinet on Bryant systems. It's an expandable media filter cabinet installed by HVAC contractors, identical to the Carrier EZ Flex. The filter expands like an accordion when inserted.

How to identify: Your cabinet model number starts with EZXCAB. The cabinet has a "month indicator" dial on the front to track filter changes.

How often to replace: Bryant recommends replacing EZ Flex filters every 6–12 months depending on household conditions. Homes with pets, allergies, or nearby construction should change closer to 6 months.

Shop All Bryant / Carrier EZ Flex Filters →

Standard Return Vent Filters (No Cabinet)

If your Bryant furnace has no separate filter cabinet, you use a standard return vent filter. These are the flat or pleated filters that slide into a slot in the return air duct or at the furnace air intake.

How to find your size:

1. Remove your current filter and read the size printed on the frame (example: 20×20×1)
2. If no size is printed, measure the length, width, and depth and round up to the nearest inch
3. That rounded number is your nominal size — the size you order by

Standard filters are available in MERV 8, MERV 11, and MERV 13 at Atomic Filters.

Shop Standard Filters by Size → | Use Our Filter Size Chart →

Bryant Furnace Models and Compatible Filter Cabinets

This table shows which filter system is most commonly paired with each Bryant furnace series. Remember that the filter cabinet is a separate component — always verify by checking the cabinet label.

Bryant Evolution Series (Premium)

Evolution Series furnaces are Bryant's top-of-line systems with variable-speed blower motors and two-stage gas valves. These are most commonly paired with the Perfect Air Purifier (GABBXCC) or EZ Flex (EZXCAB).

Bryant Preferred Series (Mid-Range)

Preferred Series furnaces are high-efficiency units with ECM blower motors. These commonly use the Preferred Air Purifier (PGAPAXX) or EZ Flex (EZXCAB).

Bryant Legacy Series (Value)

Legacy Series furnaces are budget-friendly options. They typically use EZ Flex (EZXCAB) or standard return vent filters.

Bryant vs. Carrier: Complete Filter Cross-Reference

Since both brands are manufactured by Carrier Global Corporation, their filters are fully interchangeable. Use this table to cross-reference:

Bottom line: If you're searching for a "Bryant filter" and you find the Carrier equivalent in stock, it will fit your system perfectly. And vice versa.

Read our full Carrier Furnace Filter Guide →

How to Read Your Bryant Furnace Model Number

Bryant uses a straightforward naming system for their furnace models:

Example: 926TA060080V17A

• 926 = Model series (Preferred 96 Two-Stage)
• T = Two-stage gas valve
• A = Design revision
• 060 = BTU input (60,000 BTU)
• 080 = BTU output (80,000 BTU)
• V = Variable-speed blower
• 17 = Cabinet width in inches
• A = Additional specification

The cabinet width matters for filter sizing. Smaller cabinets (17") pair with 16×25 filter systems. Larger cabinets (21" and 24.5") pair with 20×25 or 24×20 filter systems. But always verify by checking your filter cabinet label — the cabinet model number is the definitive answer.

Frequently Asked Questions

I have a Bryant furnace — can I use Carrier filters?

Yes. Bryant and Carrier filters are fully cross-compatible. GAPCCCAR (Carrier) fits GABBXCC (Bryant) cabinets. PGAPXCAR filters are identical between both brands. EZ Flex (EXPXXFIL) filters are the same for both. Payne furnaces also use the same systems.

What's the most common Bryant filter?

The most commonly ordered Bryant filters are the GAPCCCAR1625 (MERV 15, 16×25 size) for Perfect Air Purifier cabinets and the EXPXXFIL0016 (MERV 10, 16×25×5) for EZ Flex cabinets. For the Preferred Air Purifier, the PGAPXCAR2025 (MERV 13, 20×25) is the top seller.

My Bryant 926T furnace — what filter do I need?

The 926T is a Preferred Series furnace, but your filter depends on which cabinet was installed. Look at the filter cabinet attached to your furnace. If the cabinet says PGAPAXX, you need a PGAPXCAR filter in the matching size. If it says EZXCAB, you need an EXPXXFIL filter. If there's no cabinet, you use a standard return vent filter.

My Bryant 986T furnace — what filter do I need?

The 986T is an Evolution Series furnace, typically paired with a Perfect Air Purifier (GABBXCC) cabinet or EZ Flex (EZXCAB). Check your cabinet model number. If it starts with GABBXCC, you need a GAPBBCAR or GAPCCCAR filter. If EZXCAB, you need an EXPXXFIL filter.

How often should I replace my Bryant filter?

• Perfect/Infinity MERV 15 (GAPBBCAR/GAPCCCAR): Every 12 months
• Preferred/Performance MERV 13 (PGAPXCAR/AGAPXCAR): Every 8–12 months
• EZ Flex MERV 10/13 (EXPXXFIL): Every 6–12 months
• Standard 1" filters: Every 30–90 days

Homes with pets, smokers, or allergy sufferers should change on the shorter end of these ranges.

Can I upgrade my EZ Flex from MERV 10 to MERV 13?

Yes. Simply replace your EXPXXFIL0016 (MERV 10) with an EXPXXFIL0316 (MERV 13) or your EXPXXFIL0020 with an EXPXXFIL0320. Same cabinet, same dimensions, no modifications required.

Is Payne the same as Bryant and Carrier for filters?

Yes. Payne is another brand under the Carrier Global umbrella. Payne systems use the same filter cabinets and filters as Carrier and Bryant. If you have a Payne furnace with a PGAPAXX or EZXCAB cabinet, the same filters listed in this guide will fit.

What is the difference between GAPBBCAR and GAPCCCAR?

GAPBBCAR is the Bryant part number and GAPCCCAR is the Carrier part number for the same MERV 15 Infinity/Perfect filter. They are identical in dimensions and performance. Use whichever is available or offers the better price — both fit Bryant GABBXCC and Carrier GAPAAXCC cabinets.

Still Not Sure Which Bryant Filter You Need?

We help Bryant and Carrier furnace owners find the right filter every day. Here's how we can help:

📞 Call us at 910-401-3910 — Tell us your Bryant furnace model number, filter cabinet model number, or the part number on your current filter.

📧 Email info@atomicfilters.com — Send us a photo of your filter cabinet label or current filter and we'll match it.

🔍 Search our site — Enter any Bryant or Carrier filter part number (GAPBBCAR2025, GAPCCCAR1625, EXPXXFIL0020, PGAPXCAR2025, etc.) in our search bar.