Aqua Fresh WF292 Replacement for Amana WF401,12527304, Kenmore 46-9904 Refrigerator Water Filter
- Ultra-Effective Filtration
- Easy Installation and Operation, No tools required
- Comparable to 12527304 Amana Refrigerator Filters and Water Sentinel WSA-1 Refrigerator Filters
- Reduces contaminants and impurities from your drinking water while keeping it odor-free
- Filter lasts for up to 6-months, depending on usage.
Amana: 12527304, 12527301, 12527302, 12527303, 12527305, 12527307, 12527308, 12527309, 12388401, 12388402, 12388403, 12388404, 12388405, 123884, 12319801, 67003634, 12589203, 12589206, 12527504, R0130021, R0130022, WF30, WF401P, WF401S, WF401T
Kenmore/Sears: 46-9014, 9014P, 46-9904, 9904P
Also Replaces Icepure RWF0900A, EcoAqua EFF-6021A, Water Sentinel WSA-1 filter cartridge.
**Please note this is a compatible spare part and the manufacturers' names and part numbers have been used for reference purposes only.
1. Twist the old filter a quarter-turn counterclockwise and Pull it straight down (the water will shut off automatically).
3. Push the new filter up into the fridge until it stops and twist it a quarter-turn clockwise
5. Reset your 'change filter' light (if your fridge has one).
6. Flush filter with 3-4 gallons of with water until water runs clear. Some noise is not uncommon as air is purged from the system.
Note: The filter must be pushed firmly into the receiver and turned until the filter is locked in place. If the filter is not locked correctly, water will not flow.
For optimum performance, it's recommended you change your filter every 6 months or 300 Gallons
When you are buying your air filter online most important thing to know is Air Filters have two sizes that you need to understand the Nominal size and the Actual Size. Not understanding these numbers often leads to consumers purchasing a filter that does not fit their Furnace or HVAC system. See the complete list of Air Filters by Size Rating and Brand.
Not understanding the Nominal Filter Size is the primary culprit for incorrectly purchased filters.The Nominal Size is the usually the dimensions used to Label the filter. For instance 16x20x1. These dimensions are a rounded value on the filters actual measurements. The actual measurements on this filter may be 15.5x19.5x.75, but that could vary by brand and manufacturer. So in order to make sure you have the correct size filter, especially if you are replacing with a different brand it is important to confirm the actual size on the filter. When purchasing filters on the internet the Nominal size is usually found in the product title.
The actual size as you might have guessed are the actual dimensions of the filter by length, width and thickness. This size is often on the filter right below the Nominal size and is usually labeled as the actual size. When you are buying a filter online the actual size is sometime in the product bullet point or the product description. If your filter does not have actual dimensions on the outside of the filter, you can measure you filter to get the correct dimensions. Some brands have a foam gasket on the outside of the filter, in this case, you will want to make sure you have a compatible actual size and that it also has the foam to ensure a snug fit.
|Size||Example 1||Example 2|
Furnace filters should fit securely but should not have to be forced into position. If you have to force the filter into its slot, then it is probably too big. Forcing an improper filter size in a filter can cause it to buckle, damaging the filter or reducing its ability to function properly. Filters are a smaller than their slot to allow for easy replacement. Some HVAC units may need a filter with dimensions that are unique or uncommon. In these cases, a custom filter needs to be ordered.