$ 22.99 $ 29.99
Atomic Filters 30900 Hunter Compatible Air Purifier HEPA Purifier Air Filter is a compatible version of the Hunter 30940 HEPAtech Purifier Filter. This HEPA Filter captures airborne allergens such as dust, mold spores, pet dander, pollen, and smoke. HEPA filters capture approximately 99.97% of airborne pollutants as small as 0.3 microns.
30900 Hunter Air Purifier Compatible Filter by Atomic Filters is the correct replacement filter for the following air cleaner models:
The 30900 Compatible by Atomic Filters Specifications:
Recommended for the peak performance, replace your Atomic Filters Air Filter every 6 months. This package contains 1 HEPA filter.
$ 23.48 $ 35.95Size Guide
Compatible Carbon Replacement for Hunter 30900 HEPAtech Air Purifier Pre-Filter. This 30900 air purifier filter contains a sub-micron (electrostatic) filter which captures up to 99.97% of airborne particles as small as .1...
$ 26.44 $ 36.95Size Guide
Carbon Pre-filter cut to fit replacement for Hunter 30901. Atomic Compatible 30901 Replacement Pre-Filter for Hunter HEPAtech Quiet Flo Air Purifiers(2 pack) Replacement for Hunter Model 30901, 30903, & 30907...
$ 26.44 $ 35.95Size Guide
Compatible Carbon Pre-Filter Replacement for Hunter 30901 Carbon Air Purifier Pre-Filter. This 30901 air purifier filter contains activated charcoal that absorbs odors from pet, smoking, cooking and other airborne contaminates....
When you are buying your air filter online most important thing to know is Air Filters have two sizes that you need to understand the Nominal size and the Actual Size. Not understanding these numbers often leads to consumers purchasing a filter that does not fit their Furnace or HVAC system.
Not understanding the Nominal Filter Size is the primary culprit for incorrectly purchased filters.The Nominal Size are the usually the dimensions used to Label the filter. For instance 16x20x1. These dimensions are a rounded value on the filters actual measurements. The actual measurements on this filter may be 15.5x19.5x.75, but that could vary by brand and manufacturer. So in order to make sure you have the correct size filter, especially if you are replacing with a different brand it is important to confirm the actual size on the filter. When purchasing filters on the internet the Nominal size is usually found the in the product title.
The actual size as you might have guessed are the actual dimensions of the filter by length, width and thickness. This size is often on the filter right below the Nominal size and is usually labeled as the actual size. When you are buying a filter online the actual size is sometime in the product bullet point or the product description. If your filter does not have actual dimensions on the outside of the filter, you can measure you filter to get the correct dimensions. Some brands have a foam gasket on the outside of the filter, in this case you will want to make sure you have a compatible actual size size and that it also has the foam to insure a snag fit.
|Size||Example 1||Example 2|
Furnace filters should fit securely but should not have to be forced into position. If you have to force the filter into its slot, then it is probably too big. Forcing an improper filter size in a filter can cause it to buckle, damaging the filter or reducing its ability to function properly. Filters are a smaller than their slot to allow for easy replacement. Some HVAC units may need a filter with dimensions that are unique or uncommon. In these cases, a custom filter needs to be ordered.